R+B Filter Manufacturing Enterprises Private Limited

Features:

• Compact dust collectors
• Low upflow velocity in the system
• Small interior space of the filter cartridge

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

For raw gas side installation with Rd 72 thread:
Accessory: filter holder 310-001-000071

Features:

• Quick and easy assembly without tools
• Installation by turning through 120°
• Quick cartridge change

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Short injectors
• Venturi nozzles
• Solenoid valves
• Valve controls
• Flow guide cylinder

For raw gas side installation:
Accessory: filter holder 310-001-000019

Features:

• Toolless assembly through thread
• Interchangeable with filter bags
• Can be used in all industrial areas

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

For raw gas side installation with Rd 100 thread:
Accessory: filter holder 310-001-000038

For clean side installation Ø 185 mm:

Features:

• Easy to clean
• Open and flat pleats
• High mechanical strength

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Short injectors
• Solenoid valves
• Valve controls

For raw gas side installation with rod:
Accessory: filter holder 310-001-000023

For clean side installation Ø 260 mm:

For raw gas side installation with snap lock:

Features:

• Up to 21 m² filter area per element
• Filter material with nanofibers and flame retardant possible
• Components harmless with food contact upon request

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Cleaning nozzles
• Short injectors
• Venturi nozzles
• Solenoid valves
• Valve controls
• Flow guide cylinder

For raw gas side installation with tie rod or both ends open:

Features:

• For dust which is difficult to clean
• Universally applicable
• Suitable for high dust concentrations

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

For raw gas side installation with tie rod:
Accessory: filter holder 310-001-000029

For clean side installation Ø 150 mm:


For raw gas side installation with snap lock:

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

For clean side installation Ø 195 mm:

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Features:

• For compact systems
• Installation by click system
• Low upflow velocity in the system
• Smaller interior of filter cartridge

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

For raw gas side installation with click system:

Features:

• Robust flange made of aluminium
• Installation possible from the raw gas side or clean side
• Long service life

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE
• Glass Fiber

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Cleaning nozzles
• Short injectors
• Venturi nozzles
• Solenoid valves
• Valve controls
• Flow guide cylinder

Series flange Ø TK = 205 mm for raw gas side or clean side installation

Features:

• Simple assembly by screwing in
• No tools required
• Star-shaped bottom possible

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80°C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

Series Thread Rd 60:
Accessory: filter holder 310-001-000043

Series Thread Rd 72:
Accessory: filter holder 310-001-000071

Series Thread Rd 74:
Accessory: filter holder 310-001-000045

Features:

• Low pleat depth, easy to clean
• For agglomerating dust
• High air to cloth ratios possible

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80°C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140°C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

For raw gas side installation with snap lock:
Accessory: filter holder 310-001-000026

For clean side installation Ø 130 mm:

Features:

• Assembly without tools by inserting from the clean gas side
• Universally applicable
• Suitable for high dust concentrations
• Maximum operating temperature 80°C, special design 110°C on request

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Short injectors
• Cleaning nozzles
• Solenoid valves
• Valve controls

For clean side installation Ø 157 mm
for hole in the filter mounting plate Ø 159 mm

Accessory: filter holder 310-001-000031

Features:

• Quick and easy assembly from the clean gas side
• Robust construction
• Metal upper end cap
• Replacement for filter hoses

Filtration Media Available:

• Polyester
• Polypropylene
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

For clean side installation Ø 178 mm:
for hole in the filter mounting plate Ø 159 mm

Accessory: Seal 370-001-000001

Filtration Media Available:

• Polyester
• Polypropylene
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

For clean side installation Ø TK 122 mm:

Features:

• Compact systems
• Low upflow velocity in the system
• Smaller interior of the filter cartridge

Filtration Media Available:

• Polyester
• Polypropylene
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

For raw gas side installation with rod:

Filtration Media Available:

• Polyester
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

For raw gas side assembly with flange rectangular 362 × 406 mm:

XNUMX lug flange made of metal or synthetics.

Filtration Media Available:

• Polyester
• Polypropylene
• Glass fibre paper
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

3-lug flange Ø TK 180 mm for installation on the raw or clean gas side:

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

4-lug flange Ø TK for assembly = 365 mm asymmetric

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80 °C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Features:

• Simple assembly by screwing in
• No tools required
• Star-shaped bottom possible

Filtration Media Available:

• Polyester
• Polypropylene
• Cellulose
• Aramid
• Polyphenylene sulfide
• PTFE

The filter material is adapted to the properties of the dust. Our filter media are certified according to DIN EN 60335-2-69 or DIN EN 1822.

Special filter media for unusual operating conditions are available on request.

Properties:
Standard:

• Maximum operating temperature: 80°C
• Metal parts: galvanized steel
• Cleaning with compressed air
• Suitable for all ATEX zones

Special designs:

• Maximum operating temperature up to 140 °C
• You can find filter cartridges that are heat-resistant up to 400 °C at Hot gas filtration
• Metal parts: stainless steel
• Certified for food according to REG (EC) 1935, FDA CFR 21

Accessories:

• Filter holders
• Cleaning nozzles
• Solenoid valves
• Valve controls

Series Thread Rd 60:
Accessory: filter holder 310-001-000043

Series Thread Rd 72:
Accessory: filter holder 310-001-000071

Series Thread Rd 74:
Accessory: filter holder 310-001-000045