R+B Filter Manufacturing Enterprises Private Limited

Absolutely Clean:
The highest levels of cleanliness are required in the production and processing of food: It must be ensured that no external substances contaminate the products intended for consumption. In order to guarantee this degree of purity, filter elements from R+B Filter are certified according to the legal regulations.

• Certified according to EU regulations and US FDA regulations
• Metal parts made of stainless steel
• Suitable for all ATEX zones
• Filter media harmless for food

Filter elements from R + B Filter can be found in many work processes in the production and processing of food. They are used wherever certified filter elements are required according to the following regulations:

• REG (EC) 1935/2004
• REG (EC) 2023/2006
• REG (EU) 10/2011
• US FDA 21 CFR

Advantages:

• Low pressure drop
• Excellent operational behaviour due to pleat spacers on clean side
• Polyester non-woven with teflon membrane is cleanable
• Installation is possible from raw gas side or clean side
• Can be installed in horizontal or vertical position

Advantages:

• Low pressure loss
• Low overall height of the suction system
• Installation possible horizontally or vertically
• Installation either on the raw or clean gas side
• Cleaning with brushes or compressed air

The highest purity:
In industrial manufacturing processes in the manufacture of pharmaceuticals and medicine, the filter elements of R+B Filter the protection of people, products and machines. They enable the recovery of valuable raw materials. A GMP-compliant production of the filter elements with certified raw materials ensures maximum safety for pharmaceutical companies. Filter cartridges and filter panels from R+B Filter meet all regulatory requirements of the industry.

• Certified according to EU regulations and US FDA regulations
• Metal parts made of stainless steel
• Suitable for all ATEX zones
• White filter media

Certified filter elements from R+B Filter achieve the best results in terms of purity, occupational safety and yield in numerous work processes in the manufacture of pharmaceutical products. They are certified and manufactured according to the following regulations:

• REG (EC) 1935/2004
• REG (EC) 2023/2006
• REG (EU) 10/2011
• US FDA 21 CFR

Advantages:

• Filter efficiency ≤ 1 mg / m³ possible 
• Highest storage capacity 
• Long life time 
• Lowest pressure loss 
• Compact models 
• Exchangeable pre-filter

Filter Medium:

• Multistage filter medium especially developed for the separation of liquid particles 
• High storage capacity due to several filter levels 
• Exchangeable pre-filter 
• Efficiency of 99 % for particle sizes ranging from 1 to 2.5 µm

Features:

• Type: filter cartridges or filter cassettes
• All standard sizes and installation systems available 
• Maximum operating temperature 80°C
• Metal parts of galvanized steel

Special Types:

• Temperature resistant up to 100°C
• Metal parts of stainless steel 
• Other individual types

Specifications:

Advantages:

• Low pressure loss due to pleat spacers
• Low height of dust collector 
• The position in the filter can be vertically or horizontally. 
• Installation is optional from the raw gas side or the clean side. 
• Cleanable HEPA filter: filter class H13 according to DIN EN 1822 or dust class H according to DIN EN 60335-2-69 can be achieved.

Filter Media:
The filter media consist of polyester non wovens, polypropylene non wovens or needle felts. They can be equipped antistatic, oil and water repellent or with finishes or membrane on the filter side. They are tested in accordance with DIN EN 60335-2-69. The filter media are suitable for the filtration of health-hazardous dusts. According to the application the best possible filter medium for the respective case is selected.

Cleaning:
The filter cassettes can be cleaned by compressed air or brushes. Technical changes reserved 035/11

Advantages:

• Low pressure loss due to pleat spacers
• Low height of dust collector 
• The position in the filter can be vertically or horizontally. 
• Installation is optional from the raw gas side or the clean side. 
• Cleanable HEPA filter: filter class H13 according to DIN EN 1822 or dust class H according to DIN EN 60335-2-69 can be achieved.

Filter Media:
The filter media consist of polyester non wovens, polypropylene non wovens or needle felts. They can be equipped antistatic, oil and water repellent or with finishes or membrane on the filter side. They are tested in accordance with DIN EN 60335-2-69. The filter media are suitable for the filtration of health-hazardous dusts. According to the application the best possible filter medium for the respective case is selected.

Cleaning:
The filter cassettes can be cleaned by compressed air or brushes. Technical changes reserved 035/11